Temp Sensor Status; Power Supply Status; Slot Summary - 3Ware 9550SXU-12 User Manual

Managing an Enclosure

Temp Sensor Status

Power Supply Status

Slot Summary

210
Below is a list of possible temperature sensor statuses.
Note that the temp sensor status indicates the temperature of the enclosure or
backplane. Drive temperature, if supported, is available on the Drive Details
page.
• OK. The temperature sensor is functioning normally.
• Failure. The temperature sensor is present, but is malfunctioning.
• There is no temperature sensor installed.
Not Installed.
• The status of the temperature sensor is not reportable.
Unknown.
•
Over Temp Warning.
temperature.
• Temperature is higher than safe operating temperature.
Over Temp Fail.
•
Under Temp Warning.
temperature.
• Temperature is lower than safe operating temperature.
Under Temp Fail.
The following is a list of possible power supply statuses.
• The power supply is functioning normally.
OK.
• The power supply is present, but is malfunctioning.
Failure.
• Off. The power supply is off.
• Not Installed. There is no power supply.
• The status of the power supply is not reportable.
Unknown.
The following is a list of possible slot statuses:
• OK. The slot is functioning normally.
• A drive has been inserted in the slot.
Inserted.
• The slot is ready to accept a drive.
Ready to Insert.
•
Ready to Remove.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Temperature is higher than normal operating
Temperature is colder than normal operating
The drive in the slot can be removed.