8037 Enclosure power off
8040 Enclosure voltage normal
www.3ware.com
Cause
Applies only to the 9690SA controller.
There is a power supply in the enclosure, but it is not of a known type.
Action
Check to be sure the power supply is operational by re-seating or replacing
the failed power supply. See your enclosure documentation or contact your
enclosure manufacturer for more information.
It is recommended to use an uninterruptible power supply (UPS) to protect
against power failures.
Event Type
Warning.
Cause
Applies only to the 9690SA controller.
An enclosure power supply has been turned off.
Action
If needed for power supply redundancy or to meet power requirements, turn
the power supply back on.
It is recommended to use an uninterruptible power supply (UPS) to protect
against power failures.
Event Type
Information.
Cause
Applies only to the 9690SA controller.
The enclosure power supply voltage is now back within the acceptable range.
Action
None required.
Error and Notification Messages
309