Installing The 3Ware Driver On A Windows System That Boots From A Different Device - 3Ware 9550SXU-12 User Manual

Driver Installation
Installing the 3ware Driver on a Windows System
that Boots from a Different Device
36
If you are installing the 3ware RAID controller on a system that already has a
Windows operating system boot device, follow the instructions in this section.
If you will be using a unit managed by the 3ware RAID controller as your
boot device, see "Installing the 3ware Driver and Windows on a New RAID
Unit" on page 34.
With the 9.5.1 release, 3ware supplies a driver install utility on the 3ware CD
that can simplify driver installation.
You can use one of these two procedures:
• Installing the 3ware driver with the 9.5.1 driver install utility
• Installing the 3ware driver under Windows with the Found New
Hardware wizard
Installing the 3ware driver with the 9.5.1 driver install
utility
The driver install utility can be used to install the driver before or after
installing the 3ware RAID controller card.
To install the 3ware driver with the 9.5.1 driver install utility
1 Insert the 3ware CD into your CD-ROM drive. Click
license agreement.
The 3ware menu appears.
2 Click
Install Windows Drivers
The installer will select the correct driver for your Windows operating
system and open the Device Driver Installation Wizard
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Agree
.
at the AMCC