3Ware 9550SXU-12 User Manual page 120

Configuring Units
108
Tip:
If you want to use all available drives, press
them all.
Figure 49. Asterisks Next to Selected Drives
2 After all drives for the unit are selected,
and press .
Enter
Tip:
You can also press
3 On the
3ware Disk Array
listed.
Figure 50. Create Disk Array Display
4 (Optional) Press Enter
again to set the name.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Tab to the
Alt-C
to choose Create Unit.
screen, make sure that the proper drives are
and type a name for the unit; then press
Alt-A
to select
Create Unit button
Enter