Managing E-Mail Event Notification - 3Ware 9550SXU-12 User Manual

3DM 2 (3ware Disk Manager) Introduction

Managing E-mail Event Notification

82
To set or change the password
1 Click
3DM 2 Settings
2 On the 3DM 2 Settings page, in the
password you want to change:
3 Type the current password in the
If you are changing the password for the first time, the factory-set default
password is 3ware .
4 Enter the new password in the
Confirm New Password
5 Click the
Change Password
Note:
If you forget your password, you can uninstall 3DM and then
reinstall it. This will reset the password to the default password,
3ware .
3DM can notify you when the 3ware RAID controller requires attention, such
as when a disk unit becomes degraded and is no longer fault tolerant.
E-mail event notification can only occur while 3DM is running, so it is
recommended that the 3DM process be left running in the background on the
system that contains the 3ware RAID controller.
When events occur, notification can be e-mailed to one or more recipients.
You can specify the type of events for which notifications will be sent by
selecting the severity:
• will send e-mails for all events
Information
• Warning will send e-mail for events with severity of Warning and Error.
• Error will send e-mail for events with severity of Error only.
Events are listed on the 3DM
Event notification can be set up during 3DM installation, and can be changed
on the 3DM 2 Settings page.
Note:
If you are using VMware, you will need to configure the VMware firewall to
allow outgoing email, as all ports are blocked by default. See "Configuring the
VMware Firewall to Allow Email Notification" on page 83
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
on the 3DM menu bar.
Password
User or Administrator
Current Password
New Password
field.
button to enact the change.
page.
Alarms
section, select the type of
.
field.
field and again in the