Creating A Freebsd Driver Diskette - 3Ware 9550SXU-12 User Manual

Sas/sata raid software raid controllers
Table of Contents

Advertisement

Driver Installation
54
Driver source files
FreeBSD 5.x:
FreeBSD 6.x:
FreeBSD 7.x:
You can download the latest compiled and tested driver
3ware web site.
modules and driver source files for FreeBSD from the 3ware web site at
http://www.3ware.com/support/index.asp.

Creating A FreeBSD Driver Diskette

You will need a driver diskette if you are going to be installing FreeBSD on a
unit or drive managed by a 3ware RAID controller card which will become
the boot unit and for which your version of FreeBSD does not have a built-in
driver.
To create a driver diskette
1
Insert a blank floppy diskette and the 3ware software CD-ROM into a
FreeBSD installed system.
2
Create a mount point for the floppy.
mkdir /floppy
3
Format the floppy.
newfs /dev/fd0
4
Mount the floppy drive.
mount -t ufs /dev/fd0 /floppy
5
Mount the 3ware software CD-ROM.
mount -t cd9660 /dev/acd0 /cdrom
ROM drive).
6
Copy the appropriate module from the 3ware CD-ROM to the floppy. For
example:
cp /cdrom/packages/drivers/freebsd/6.3/x86_64/twa.ko /floppy
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
for FreeBSD 5.x, 6.x, and 7.x, located at:
packages/drivers/freebsd/src/5.x
packages/drivers/freebsd/src/6.x
packages/drivers/freebsd/src/7.x
(assuming fd0 is the floppy disk drive)
(assuming acd0 is the CD-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9690sa3ware 9650se

Table of Contents