Deleting A Unit - 3Ware 9550SXU-12 User Manual

Deleting a Unit

www.3ware.com
• Go to Administrative Tools > Computer Management, and then select
Disk Management in the list on the left.
Only dynamic disks can be expanded with Windows Disk
Management. If the unit is shown as a basic disk, right-click on the
disk icon and change it to a dynamic disk.
Older Windows systems cannot convert basic disks into dynamic
disks after the file system has been created.
• If the unit is shown as a dynamic disk, right-click on it and choose
Extend Volume to launch the Extend Volume wizard.
In Linux and FreeBSD, the tools to expand the partition and file system
can vary, depending on the kernel version and file system that you are
using. Please consult your Linux/FreeBSD documentation and the 3ware
Knowledgebase for more information.
You delete a unit—either an array of disks, or a Single Disk—when you want
to reconfigure the unit or use the drives for other purposes.
After you delete a unit, the drives appear in the list of Available Drives.
Warning:
When a unit is deleted, all of the data on that unit will be lost. The drives
cannot be reassembled into the same unit because the data on it is erased. If you
want to reassemble the drives into the same unit on another controller, use the
Remove Unit button in 3DM instead of the Delete Unit button. Or, if you're at the
BIOS level already, you can shut down the computer and physically move the drives
to another 3ware 9000 series RAID controller. When you restart your system, the
controller will recognize the unit. For more information see "Moving a Unit from One
Controller to Another" on page 138.
If you have incomplete drives, or drives that appear with a message such as
"Unsupported DCB," indicating that they were previously part of a unit on a
3ware 7000/8000 series controller, they must be deleted before you use them.
(If you want to move a unit from a 7/8000 controller to a 9000 series
controller, you must convert the drives first. For more information, see
"Moving a Unit from One Controller to Another" on page 138.)
Deleting a Unit
133