3Ware 9550SXU-12 User Manual page 260

3DM 2 Reference
248
• Remote Access
• HTTP Settings
E-mail Notification
Use the fields in this section to set up and manage notifications of events by e-
mail.
This field determines whether e-mail notification is
Send E-mail.
Disabled . It is a good idea to enable this feature, so that you receive email
when your units or drives have problems.
Specifies the type of events for which notifications should be sent.
Notify On.
A severity of
Information
Warning will send e-mail for alarms with severity of Warning and Error. A
severity of will send e-mail for alarms with severity of Error.
Error
Enter the email address which will appear in the "From" field.
Sender.
Recipient. The e-mail address to which notifications should be sent. You can
enter multiple addresses, separated by commas (,).
Mail Server (name or IP).
access to a name server, you may enter the machine name of the mail server in
the Server field. Otherwise, use the IP address.
Mail Server Login. If your email server requires authentication, enter the
login for the server. If you are uncertain of the login, contact the administrator
of the email server.
Mail Server Password.
password for the Mail Server login.
Save E-mail Settings button.
Send Test Message button.
settings.
Password
Use the fields in this section to set the passwords for the User and
Administrator. When 3DM is first installed, the default password for both is
3ware .
Change Password For.
password: User or Administrator
3DM, while Administrators can make changes and administer the controller
and associated drives.
Enter the current password.
Current Password.
Enter the new password.
New Password.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
will send e-mails for all alarms, a severity of
If the machine on which you are running 3DM has
If your email server requires authentication, enter the
Saves the e-mail notification settings.
Sends a test message using the saved e-mail
Select the access level for which you are setting the
. Users can only view status information in
or
Enabled