Using The Update Utility With Multiple Controllers - 3Ware 9550SXU-12 User Manual

Maintaining Your Controller

Using the Update Utility With Multiple Controllers

188
Figure 78. Dialog Prompting for Restart
8 If the driver you are installing is unsigned, you will receive a message to
that effect.
To complete the installation with an unsigned driver, click OK.
9 If a final message box confirms that the process is complete, click OK.
(This message appears if you do not need to restart your computer.)
Figure 79. Dialog Indicating Update Complete
When your system has multiple 3ware RAID controllers installed, the update
utility lets you update the firmware on any or all of the installed controllers.
To update the firmware on multiple controllers
1 Follow steps 1 through 5 above, under "Updating the 3ware Driver and
Firmware Under Windows" on page 184.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1