3Ware 9550SXU-12 User Manual page 71

www.3ware.com
8 Unmount the CD.
cd /
umount /mnt/cdrom
and remove the CD from the drive.
9 Reboot the server.
You can now create one or more RAID units. Instructions are available in
the 3ware SAS/SATA RAID Software User Guide, Version 9.5, under
"Configuring Units" on page 85.
Note:
If you wish to verify successful installation of the driver, you can use one of
the following commands:
esxupdate -l query
The driver package should be mentioned in the resulting message.
vmkload_mod -l
The driver should be listed as one of the loaded modules.
Driver Installation Under VMware ESX 3.x Server
59