3Ware 9550SXU-12 User Manual page 165

www.3ware.com
• Choose
Monitor > Enclosure
list of enclosures, click the ID number of the enclosure. On the
Enclosure Detail page, identify the drive you want to physically
locate.
2 Check the box in the
The LED on the enclosure begins blinking.
3 When you are finished working with the drive and no longer need to see
the LED, return to this page and uncheck the
To blink the LED for a drive through 3BM
1 On the main 3BM screen,
2 On the pop-up menu, select
3 On the Drive Information page, use the arrow keys to select the drive you
want to identify.
4 Press .
F4
The LED on the enclosure begins blinking. (Note that this feature is only
available for drives in enclosures.)
5 When you are finished working with the drive and no longer need to see
the LED, return to this page and press
To blink the LEDs for all drives in a unit
1 Choose Information > Unit Information
2 On the Unit Information page, identify the unit you are interested in.
3 Check the box in the
The LEDs for the drives in the selected unit begin blinking.
4 When you no longer need to see the LEDs, return to this page and
uncheck the Identify
Locating a Drive by Blinking Its LED
from the main menu in 3DM. On the
Identify column.
Tab to Information
Drives and press
F4 again to halt the blinking.
from the main menu in 3DM.
column.
Identify
box.
Identify box.
and press Enter .
Enter .
153