3Ware 9550SXU-12 User Manual page 32

Getting Started with Your 3ware RAID Controller
20
Initial Settings for Policies and Background Tasks
The table below lists the default settings for policies and background tasks.
These settings are used if you do not explicitly change the policy settings.
Table 6: Default Settings for Policies and Background Tasks
Policy
Controller-Level Settings
(For details, see "Configuring Your Controller" on page 86
Auto-Rebuild
Auto-Carving
Auto-Detect
Auto-Verify Preferred Start
Day and Time (Basic)
Auto-Verify Verify Schedule
(Advanced)
Carve Size or Factor
Drives Per Spinup
Delay Between Spinup
Export Unconfigured (JBOD)
Disks
Staggered Method
Staggered Spinup
Unit-Level Settings
(For details, see "Setting Unit Policies" on page 116)
Auto Verify
ECC Overwrite (Continue on
Error When Rebuilding)
Boot Volume Size
Initialization Method
Queuing (NCQ)
Rapid RAID Recovery
StorSave Profile
Write Cache
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Default Value
Enabled
Enabled
Enabled
Friday, 12 am
Seven days of the week,
starting at 12 am and
running 24 hours.
2048 GB
1
6 seconds
No
ATA-6
Enabled
Enabled
Disabled
Unspecified
Foreground
Enabled
All (Fast Rebuild/Shutdown)
Protection
Enabled
Where to Change
3BM, 3DM, CLI
3BM, 3DM, CLI
CLI
3BM, 3DM, CLI
3DM, CLI
3BM, 3DM, CLI
3BM, CLI
3BM, CLI
3BM, CLI
3BM
3BM
3BM. 3DM, CLI
3BM, 3DM, CLI
3BM, CLI
3BM
3BM, 3DM, CLI
3BM, 3DM, CLI
3BM, 3DM, CLI
3BM, 3DM, CLI