Software Installation
328
12 If you want the Installation Wizard to connect to 3DM 2 after you finish
the wizard, check the
3DM and configure a RAID unit right away.
If you do not want to connect to 3DM 2 at this time, leave the box
unchecked.
When you are ready, click
Figure 122. Final Installation Screen
13 On the summary screen, review the installation that is about to occur.
If you want to make changes, use
When you are ready, click
Figure 123. Installation Summary Screen
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Connect to 3DM 2
box. This allows you to log into
to continue.
Next
to move back through the screens.
Back
Install
to continue.