Enclosure Voltage Over; Enclosure Voltage Under; Enclosure Voltage Unknown - 3Ware 9550SXU-12 User Manual

Troubleshooting

8041 Enclosure voltage over

8042 Enclosure voltage under

8043 Enclosure voltage unknown

310
Event Type
Error.
Cause
Applies only to the 9690SA controller.
The enclosure power supply voltage is higher than the normal range.
Action
This error is rare. If you see it you may need a UPS or voltage regulator to
stay within the recommended voltage range.
Event Type
Error.
Cause
Applies only to the 9690SA controller.
The enclosure power supply voltage is lower than the normal range. This can
be due to a failing power supply or an unreliable power source.
Action
If due to a failing power supply, replace it as soon as possible.
It is recommended to use an uninterruptible power supply (UPS) to protect
against power failures.
Event Type
Warning.
Cause
Applies only to the 9690SA controller.
The enclosure is not reporting voltage data. This can be due to a failing power
supply.
3ware SAS/SATA RAID Software User Guide, Version 9.5.1