Viewing 3Dm Remotely Using A Web Browser; Working With The 3Dm Screens - 3Ware 9550SXU-12 User Manual

Viewing 3DM Remotely Using a Web Browser

Working with the 3DM Screens

www.3ware.com
When remote administration is enabled on the 3DM 2 Settings page, you can
use 3DM to check status and administer your 3ware RAID controller from a
browser on any computer, over an internet connection.
You do not need to install the 3DM software on the remote computer.
To connect to 3DM 2 through your web browser
• In the address line of your browser, enter the URL or IP address of the
system containing the 3ware RAID controller.
If you do not know the URL or IP address for the system, you can contact
your network administrator or from a Windows command prompt, type
ipconfig . From a Linux command prompt, type
Note:
When using 3DM to access a remote system, and auto logout
is enabled, the time on the local system must match the time on the
file server. If the time varies by more than 30 minutes, it will not be
possible to remotely monitor the system (you will not be able to log
in). If you are in a different time zone, you must first change the time
of the local system to match the time of the remote system.
3DM's features are organized on a series of pages you view in your browser.
After you log in to 3DM, the Summary page shows a list of controllers
installed in the computer at the URL you specified.
Note:
If you expect to see a controller that is not listed, it may not be compatible
with the driver that is loaded; a firmware flash upgrade may be required.
Working with the 3DM Screens
ifconfig .
75