Using This Manual - Teledyne 300E Instruction Manual

M300E DOCUMENTATION

1.1. Using This Manual

This manual has the following data structures:
1.0 Table of Contents
Outlines the contents of the manual in the order the information is presented. This
is a good overview of the topics covered in the manual. There is also a List of
Tables and List of Figures. In the electronic version of the manual, clicking on a
specific entry in one of these tables automatically moves the view to the desired
section.
2.0 Specifications and Warranty
This section contains a list of the analyzer's performance specifications, a
description of the conditions and configuration under which EPA equivalency was
approved and T-API's warranty statement.
3.0 Getting Started
A concise set of instructions for unpacking your analyzer, installing it and running it
for the first time.
4.0 FAQ
Answers to the most frequently asked questions about operating the analyzer.
5.0 Optional Hardware & Software
A description of the various options available that add functionality to your
analyzer.
6.0 Operation Instructions
This section includes step-by-step instructions for operating the analyzer and using
its various features and functions such as the Serial I/O Ports and the iDAS.
The flowcharts appearing in this manual contain typical representations of the analyzer's display
during the various operations being described.
These representations are not intended to be exact and may differ slightly from the actual display
of your instrument.
7.0 Calibration Procedures
General information and step-by-step instructions for calibrating or checking the
calibration of your analyzer.
14
Model 300E Carbon Monoxide Analyzer
NOTE
Instruction Manual
P/N 04288 Rev: A