Figure 3-1: Removal Of Shipping Screws - Teledyne 300E Instruction Manual

Getting Started
4. Inspect the interior of the instrument to make sure all circuit boards and other
components are in good shape and properly seated.
5. Check the connectors of the various internal wiring harnesses and pneumatic
hoses to make sure they are firmly and properly seated.
6. Verify that all of the optional hardware ordered with the unit has been installed.
These are listed on the paperwork accompanying the analyzer.
7. Once you have determined that no shipping damage exists, and the unit
includes all expected hardware options, remove all red colored shipping screws
from the bottom of the chassis as shown in Figure 3-1.
Save these shipping screws and re-install them whenever the unit is shipped to another location.
22
Shipping
Screws
Figure 3–1: Removal of Shipping Screws
NOTE
Model 300E Carbon Monoxide Analyzer
Instruction Manual
P/N 04288 REV: A