Specifications, Agency Approvals, And Warranty; Specifications; Table 2-1: Model 300E Specifications - Teledyne 300E Instruction Manual

Carbon monoxide analyzer
Table of Contents

Advertisement

Model 300E Carbon Monoxide Analyzer
Instruction Manual
2. SPECIFICATIONS, AGENCY APPROVALS,
AND WARRANTY

2.1. Specifications

Ranges
Measurement Units
Zero Noise
Span Noise
Lower Detectable Limit
Zero Drift (24 hours)
Zero Drift (7 days)
Span Drift (24 hours)
Span Drift (7 days)
Linearity
Precision
Lag Time
Rise/Fall Time
Sample Flow Rate
Temperature Range
Humidity Range
Temp Coefficient
Voltage Coefficient
Dimensions (HxWxD)
Weight
AC Power
Environmental
Conditions
Analog Outputs
Analog Output Ranges
Analog Output
Resolution
Status Outputs
Control Inputs
Serial I/O
Certifications
(1)
As defined by the USEPA
(2)
At constant temperature and voltage
(3)
Or 0.2 ppm, whichever is greater
(4)
Or 0.1 ppm, whichever is greater
(5)
Above 10 ppm range, otherwise 0.2 ppm for lower ranges
P/N 04288 REV: A
Table 2–1: Model 300E Specifications
User selectable to any full scale range from 0-1 ppm to
0-1000 ppm
3
ppb, ppm, µg/m
≤ 0.02 ppm RMS
< 0.5% of reading RMS over 5 ppm
(1)
< 0.04 ppm
(2)
< 0.1 ppm
(2)
< 0.2 ppm
< 0.5% of reading
(2) (4)
< 1% of reading
Better than 1% full scale
(1) (5)
0.5% reading
(1)
<10 sec
(1)
<60 sec to 95%
800 scc/min. ± 10%
5 - 40°C operating, 10 - 40°C EPA Equivalency
0-95% RH, Non-Condensing
< 0.05 % per °C
< 0.05 % per V
7" x 17" x 23.5" (178 mm x 432 mm x 597 mm)
50 lb (22.7 kg)
100V 50/60 Hz (3.25A), 115 V 60 Hz (3.0A),
220 – 240 V 50/60 Hz (2.5A)
Installation Category (Over voltage Category) II Pollution Degree 2
Three (3) Outputs
100 mV, 1 V, 5 V, 10 V, 2-20 or 4-20 mA isolated current loop.
All Ranges with 5% Under/Over Range
1 part in 4096 of selected full-scale voltage
8 Status outputs from opto-isolators
6 Control Inputs, 2 defined, 4 spare
One (1) RS-232; One (1) RS-485 (2 connecters in parallel)
Baud Rate : 300 - 115200
USEPA: Reference Method Number EQOA-0992-087
CE: EN61010-1:90 + A1:92 + A2:95, EN61326 - Class A
Specifications, Agency Approvals, and
3
, mg/m
(user selectable)
(1)
(1) (3)
(2) (4)
(5)
Warranty
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents