Flow Calibration - Teledyne 300E Instruction Manual

Model 300E Carbon Monoxide Analyzer
Instruction Manual

9.3.5. Flow Calibration

Once an accurate measurement has been recorded by the method described above,
adjust the analyzer's internal flow sensors by pressing:
Exit at Any
Time to Return
to main the
SETUP Menu
Toggle Keys to change
setting for
ACTUAL FLOW
until it matches the value
measured with the Flow
Meter
P/N 04288 REV: A
MAINTENANCE SCHEDULE & PROCEDURES
SAMPLE RANGE = 50.0 PPM
< TST TST > CAL
SETUP C.3
CFG DAS RNGE PASS CLK MORE
SETUP C.3
COMM VARS DIAG HALT
SETUP C.3 ENTER DIAG PASS: 818
8 1 8
DIAG SIGNAL I / O
NEXT
Repeat Pressing NEXT until . . .
DIAG FLOW CALIBRATION
PREV NEXT
DIAG FCAL ACTUAL FLOW: 751 CC/ M
0 7 5 1
EXAMPLE:
Measured Flow = 853 CC/M
DIAGFCAL ACTUAL FLOW: 853 CC/ M
0 8 5 3
DIAG FLOW CALIBRATION
PREV NEXT
CO =
SETUP
EXIT
EXIT
ENTR EXIT
ENTR EXIT
ENTR EXIT
ENTR EXIT
previous menu
EXIT ignores the new
setting and returns to the
ENTR EXIT
setting and returns to the
ENTR EXIT
EXIT returns
to the
previous menu
ENTR Accepts new
previous menu
153