Specifications, Approvals And Warranty; M200E Operating Specifications; Table 2-1: Model 200E Basic Unit Specifications - Teledyne 200E Instruction Manual

Model 200E Instruction Manual
2. SPECIFICATIONS, APPROVALS AND
WARRANTY

2.1. M200E Operating Specifications

Table 2-1:
Min/Max Range
(Physical Analog Output)
Measurement Units
1
Zero Noise
1
Span Noise
2
Lower Detectable Limit
Zero Drift (24 hours)
Zero Drift (7 days)
Span Drift (7 Days)
Linearity
Precision
Temperature Coefficient
Voltage Coefficient
1
Lag Time
1
Rise/Fall Time
Sample Flow Rate
Temperature Range
Humidity Range
Dimensions H x W x D
Weight, Analyzer
Weight, Ext Pump Pack
AC Power Rating
Power, Ext Pump
Environmental
Analog Outputs
Analog Output Ranges
Analog Output Resolution
Status Outputs
Control Inputs
Serial I/O
Certifications
1
As defined by the USEPA.
2
Defined as twice the zero noise level by the USEPA.
044100102 Rev A

Specifications, Approvals and Warranty

Model 200E Basic Unit Specifications
Min: 0-50 ppb
Max: 0-20 ppm
3 3
ppb, ppm, µg/m , mg/m
0.2 ppb (RMS)
<0.5% of reading above 50 ppb or 0.2 ppm, whichever is greater
0.4 ppb
<0.5 ppb (at constant temperature and voltage.)
1 ppb (at constant temperature and voltage.)
<0.5% of full Scale (at constant temperature and voltage.)
1% of full scale
0.5% of reading
< 0.1% per °C
< 0.1% per V
20 s
95% in <60 s
3
500 cm /min. ± 10%
5 - 40 °C operating and EPA equivalency
0-95% RH non-condensing
18 cm x 43 cm x 61 cm (7" x 17" x 23.6")
18 kg (40 lbs)
7 kg (16 lbs)
100 V, 50/60 Hz (3.25A);
115 V, 60 Hz (3.0 A);
220 - 240 V, 50/60 Hz (2.5 A)
100 V, 50/60 Hz (3.25A); 115 V, 60 Hz (3.0 A);
220 - 240 V, 50/60 Hz (2.5 A)
Installation category (over-voltage category) II; Pollution degree 2
4 outputs
All Outputs: 0.1 V, 1 V, 5 V or 10 V (user selectable)
Three outputs convertible to 4-20 mA isolated current loop.
All Ranges with 5% under/over range
1 part in 4096 of selected full-scale voltage (12 bit)
8 Status outputs from opto-isolators, 7 defined, 1 spare
6 Control inputs, 4 defined, 2 spare
1 RS-232; 1 RS-485 or RS-232 (configurable)
Communication speed: 300 - 115200 baud (user selectable)
USEPA: Reference Method Number RFNA 1194-099
CE: EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B Section
15.107 Class A, ICES-003 Class A (ANSI C63.4 1992) & AS/NZS 3548
(w/A1 & A2; 97) Class A.
(user selectable)
5