Mitsubishi Eclipse 1990 Service Manual page 108

ENGINE OVERHAUL
Items
Piston ring end gap mm (in.)
Piston pin O.D. mm (in.)
Piston pin press-in load
[Room temperature]
Crankshaft pin oil clearance mm (in.)
Connecting rod big end side clearance mm (in.)
Crankshaft, flywheel and drive plate
Bearing cap bolt shank length mm (in.)
Crankshaft end play mm (in.)
Crankshaft journal O.D. mm (in.)
pin O.D. mm (in.)
Crankshaft journal oil clearance mm (in.)
to cylinder clearance mm (in.)
block flatness of gasket surface mm (in.)
block grinding limit of gasket surface mm (in.)
'Total resurfacing depth of both cylinder head and cylinder block
block overall height mm (in.)
block I.D. mm (in.)
REWORK DIMENSIONS
Items
Cylinder head and valve
Oversize rework dimensions of valve guide
hole (both intake and exhaust) mm (in.)
Intake oversize rework
dimensions of valve seat hole mm (in.)
Exhaust oversize rework dimensions of valve
seat hole
mm (in.)
Crankshaft, flywheel and drive plate
Crankshaft out of roundness and taper of journal and pin mm (in.)
NOTE
O.D.: Outer diameter
I.D.: Inner diameter
Oversize diameter
Oil
(Ibs.)
0.05 O.S.
0.25 O.S.
0.50
0.3
0.6 O.S.
0.3 O.S.
0.6 O.S.
Revision
TSB
Standard value
21
17,500
57 (2.24)
42 (1.77)
0.05
283.9-284.1
(11.177-11.185)
85.0 (3.35)
Standard
12.25-12.27
Max. 0.01
0 . 8
9 . 8
0.4
0 . 2 5
0 . 1
0.1
0.2
value
,
,