8. Monitoring Settings
Transmission Test Execution
Transmission Test Execution
For SNMP Trap notifications or e-mail notifications, perform a transmission test to make sure that event
notifications are sent normally.
SNMP Trap Test
Perform the SNMP Trap test to check that the SNMP Trap can be sent from the ETERNUS DX to the SNMP
Manager.
The procedure to send a trap test and to check the result is as follows:
1
Perform the test transmission of the SNMP Trap.
(1)
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
(2)
Click [Network] in [Category].
The [Network] screen appears.
(3)
Click [Send SNMP Trap] in [Action].
The [Send SNMP Trap Test] screen appears.
(4)
In the [Send SNMP Trap Test] screen, click the [Send] button.
A confirmation screen appears.
(5)
Click the [OK] button.
The test transmission of the SNMP Trap is performed.
(6)
Check the test transmission completion message and click the [Done] button.
The screen returns to the [Network] screen.
2
Check the result of the test transmission.
Check that the SNMP Trap is notified to the monitoring server.
For details on the messages for test transmission, refer to "Message List".
176
Configuration Guide (Basic)