Transmission Test Execution; Snmp Trap Test - Fujitsu ETERNUS DX60 S3 Configuration Manual

Chapter 6 Monitoring Settings
6.6

Transmission Test Execution

6.6 Transmission Test Execution
For SNMP Trap notifications or e-mail notifications, perform a transmission test to make sure that event noti-
fications are sent normally.
6.6.1

SNMP Trap Test

Perform the SNMP Trap test to check that the SNMP Trap can be sent from the ETERNUS DX to the SNMP
Manager.
The procedure to send trap test and to check the result is as follows:
1
Perform the test transmission of the SNMP Trap.
(1)
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
(2)
In [Category], click [Network].
The [Network] screen appears.
(3)
In [Action], click [Send SNMP Trap].
The [Send SNMP Trap Test] screen appears.
(4)
In the [Send SNMP Trap Test] screen, click the [Send] button.
A confirmation screen appears.
(5)
Click the [OK] button.
The test transmission of the SNMP Trap is performed.
(6)
Check the test transmission completion message and click the [Done] button.
The screen display returns to the [Network] screen.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
98
P3AM-9002-01ENZ0