DIAGNOSTICS
10DEC05
12125 - SLOW SCAN COIL BOARD A7 malfunctioned
DG4825-1
Page
77 of 180
Description: The SLOW SCAN AY stopped or did not move at all.
Cause:
Action:
12126 - Caution! SLOW SCAN MOTOR is overheated
Description: The SLOW SCAN MOTOR was using excessive power and is too hot.
Cause:
Action:
12130 - SLOW SCAN CONTROLLER BOARD A6: Software Error
Cause:
Action:
12131 - SLOW SCAN CONTROLLER BOARD A6 did not communicate with
MSC
Cause 1: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action:
Cause 2: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action:
The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Do the checkout for the
BOARD
A7.
Malfunction in one or more of the following:
•
COIL BOARD A7
•
EXTRACTION BAR SENSOR S9
•
SLOW SCAN AY
1.
Check for an obstruction.
2.
Do the checkout for the
BOARD
A7.
The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Do the checkout for the
BOARD
A7.
Do the checkout for the
BOARD
A7.
Do the checkout for the
SLOW SCAN CONTROLLER BOARD A6 and COIL
SLOW SCAN CONTROLLER BOARD A6 and COIL
SLOW SCAN CONTROLLER BOARD A6 and COIL
SLOW SCAN CONTROLLER BOARD A6 and COIL
MOTION SYSTEM CONTROL BOARD
Error Codes
A1.