DIAGNOSTICS
10DEC05
Cause 2: The application software for the Windows 2000 was started again without resetting
DG4825-1
Page
94 of 180
Action:
15800 - Image resent at NT reboot
Description: The MASTER CENTRAL PROCESSING UNIT BOARD A2 sent the last
Cause:
Action:
15900 - NT rejected image at end of scan. Retransmission being attempted
Description: The software for the SCAN MANAGER did not record an image at the
Cause:
Action:
the MASTER CENTRAL PROCESSING UNIT BOARD A2.
1.
Check the Windows 2000 "Event Log" for network errors.
2.
If any errors occurred, reset the network system configuration again.
3.
Start the Windows 2000 application again.
4.
Check the CROSSOVER CABLE between the MASTER CENTRAL
PROCESSING UNIT BOARD A2 and the computer.
image after the Windows 2000 applications software started again.
Windows 2000 malfunctioned.
Call the Technical Service Center.
end of the scan. The image is sent once again and recorded.
The software indicates an image checksum error.
Call the Technical Service Center.
Error Codes