Kodak DirectView CR 825 Diagnostics Manual page 17

DIAGNOSTICS
10DEC05
DG4825-1
Page
[Laser Power]
17 of 180
[Galvo Test]
[PMT Test]
[Galvo Plot]
BUTTON
For the test procedure, see
Allows you to:
For the test procedure, see
Allows you to:
For the test procedure, see
Checks the function of the 2 PMTs.
For the test procedure, see
Allows you to:
Important
• check the power of the LASER DIODE
• set the power values for a new LASER DIODE
Important
• set the "Amplitude" of the GALVO
• check the response of the LASER DIODE
Important
Important
• check:
– response of the GALVO
– automatic gain control - AGC
– 2.5 V reference
• set the GALVO without an OSCILLOSCOPE
Using the Diagnostics
Description
Laser Power.
Galvo Test.
PMT Test.
GALVO PLOT.