13010 - Erase Time Exceeds Maximum Allowed; 13011 - Command To Erase Did Not Occur; 13012 - Msc Board A1: Invalid Command For Erase Lamps; 13013 - Msc Board A1: Software Failure During Erase - Kodak DirectView CR 825 Diagnostics Manual

DIAGNOSTICS
10DEC05

13010 - Erase time exceeds maximum allowed

DG4825-1
Page
86 of 180 Cause:
Action:

13011 - Command to Erase did not occur

Cause:
Action:

13012 - MSC BOARD A1: Invalid Command for ERASE LAMPS

Cause:
Action:

13013 - MSC BOARD A1: Software failure during erase

Description: The software did not provide the RTXC TIMER during the ERASE
Cause:
Action:

13899 - General Erase Error

Cause:
Action:

POWER SUPPLY

14001 - SLOW SCAN: Malfunction of 24 V Power

Description: The 24 V DC CIRCUIT BREAKER of the SLOW SCAN is open.
Cause:
Action:
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
function.
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
Malfunction of the 24 V DC power distribution.
Do the checkout for the
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
Error Codes
A1.
A1.
A1.
A1.
A1.
A1.