22003 - Msc Board A1: Checksum Of Main Application Failed - Kodak DirectView CR 825 Diagnostics Manual

DIAGNOSTICS
10DEC05
Cause:
DG4825-1
Page
Action:
104 of 180

22003 - MSC BOARD A1: Checksum of Main Application failed

Description: A checksum error occurred in the software of the MOTION SYSTEM
Cause:
Action:
22004 - MSC BOARD A1: RAM Test failed
Description: A failure occurred during the test of the RAM on the MOTION SYSTEM
Cause:
Action:
The software did not download.
1. Download the software again.
2. Do the checkout for the
3. If this error continues, install a new MOTION SYSTEM CONTROL BOARD A1.
CONTROL BOARD A1. The MOTION SYSTEM CONTROL BOARD A1
remains in the BOOTSTRAP PROGRAM waiting for the software to
download.
The software did not download.
1. Download the software again.
2. Do the checkout for the
3. If this error continues, install a new MOTION SYSTEM CONTROL BOARD A1.
CONTROL BOARD A1.
The software did not download.
1. Download the software again.
2. Do the checkout for the
3. If this error continues, install a new MOTION SYSTEM CONTROL BOARD A1.
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
Error Codes
A1.
A1.
A1.