19011 - Pmt Board Ramp Test Failed; Motion System Control Board; 22000 - Msc Board A1: Fatal Software Error; 22001 - Msc Board A1: Memory Did Not Erase During Download - Kodak DirectView CR 825 Diagnostics Manual

DIAGNOSTICS
10DEC05

19011 - PMT BOARD ramp test failed

DG4825-1
Page
103 of 180 Cause 1: The PMT/DAS BOARD A5 malfunctioned.
Action:

MOTION SYSTEM CONTROL BOARD

22000 - MSC BOARD A1: Fatal Software Error

Description: Failure of the checksum for the boot software. A new BOOTSTRAP
Cause:
Action:

22001 - MSC BOARD A1: Memory did not erase during Download

Description: At the start of the download to the MOTION SYSTEM CONTROL
Cause:
Action:

22002 - MSC BOARD A1: Error during download of MSC Software

Description: A program failure occurred during downloading of the software to the
1. Check the CABLE between the PMT/DAS BOARD A5 and the DAS BOARD.
2. Do:
• checkout for the
• MCPU Self Test
PROM must be installed.
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
BOARD A1, the flash memory was erased.
The software did not download.
1. Download the software again.
2. Do the checkout for the
MOTION SYSTEM CONTROL BOARD A1.
PMT/DAS BOARD A5
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
Error Codes
A1.
A1.