Kodak DirectView CR 825 Diagnostics Manual page 125

DIAGNOSTICS
10DEC05
11 If:
DG4825-1
Page
• DUPLEX CAM does not move, do the checkout for the
125 of 180
• HOOKS are not in the up position, do the checkout
BAR
• EXTRACTION BAR is not in the home position, do
POSITION
12 Check the status of the SENSORS and LEDs.
13 If the status of a SENSOR does not match the table, do the corresponding checkout.
EXTRACTION BAR SENSOR
S9
CAM INNER SENSOR S10
CAM OUTER SENSOR S11
14 Press [PINCH POSITION].
15 If:
• DUPLEX CAM does not move, do the checkout for the
• HOOKS are not in the down position, do the checkout
BAR
• EXTRACTION BAR is not in the home position, do
POSITION
16 Check the status of the SENSORS and LEDs.
SENSOR
HOOKS on the EXTRACTION
EXTRACTION BAR HOME
Status LED
X DS28
illuminated
X DS26
illuminated
DS27 not
illuminated
EXTRACTION BAR HOME
Checkout Procedures
CAM MOTOR M1
Checkout
EXTRACTION BAR SENSOR
S9
CAM SENSORS S10 and S11
CAM MOTOR M1
HOOKS on the EXTRACTION