12112 - Slow Scan Did Not Move; 12113 - Slow Scan Controller Board A6: Nvram Malfunctioned; 12115 - Slow Scan Controller Board A6: Software Error; 12116 - Slow Scan Controller Board A6 Did Not Communicate With Msc - Kodak DirectView CR 825 Diagnostics Manual

DIAGNOSTICS
10DEC05

12112 - SLOW SCAN did not move

DG4825-1
Page
75 of 180 Cause:
Action:

12113 - SLOW SCAN CONTROLLER BOARD A6: NVRAM malfunctioned

Cause:
Action:

12115 - SLOW SCAN CONTROLLER BOARD A6: Software Error

Cause 1: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action:
Cause 2: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action:
12116 - SLOW SCAN CONTROLLER BOARD A6 did not communicate with
MSC
Description: The SLOW SCAN AY did not stop moving before the next command to
Cause 1: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action:
Cause 2: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action:
The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Do the checkout for the
BOARD A7.
The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Do the checkout for the
BOARD A7.
Do the checkout for the
BOARD A7.
Do the checkout for the
move. This error indicates a communication error with the SLOW SCAN
CONTROLLER BOARD A6.
Do the checkout for the
BOARD A7.
Do the checkout for the
SLOW SCAN CONTROLLER BOARD A6 and COIL
SLOW SCAN CONTROLLER BOARD A6 and COIL
SLOW SCAN CONTROLLER BOARD A6 and COIL
MOTION SYSTEM CONTROL BOARD
SLOW SCAN CONTROLLER BOARD A6 and COIL
MOTION SYSTEM CONTROL BOARD
Error Codes
A1.
A1.