11017 - Msc Board A1: Software Error For Duplex Cam; 11018 - Duplex Cam Did Not Move To Next Position; 11019 - Duplex Cam Did Not Move To "Pinch" Position; 11020 - Duplex Cam Did Not Move To "Unlatch" Position - Kodak DirectView CR 825 Diagnostics Manual

DIAGNOSTICS
10DEC05
Cause:
DG4825-1
Page
Action:
68 of 180

11017 - MSC BOARD A1: Software Error for DUPLEX CAM

Description: The MOTION SYSTEM CONTROL BOARD A1 did not set up the
Cause:
Action:

11018 - DUPLEX CAM did not move to next position

Cause:
Action:

11019 - DUPLEX CAM did not move to "PINCH" position

Cause 1: The DUPLEX CAM malfunctioned.
Action:
Cause 2: The SLOW SCAN CONTROLLER BOARD A6 malfunctioned.
Action:

11020 - DUPLEX CAM did not move to "UNLATCH" position

Cause 1: The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Action:
Cause 2: The DUPLEX CAM malfunctioned.
Action:
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
command to move for the DUPLEX CAM.
The MOTION SYSTEM CONTROL BOARD A1 malfunctioned.
Do the checkout for the
The DUPLEX CAM malfunctioned.
Do the checkout for the
Do the checkout for the
Do the checkout for the
BOARD A7.
Do the checkout for the
Do the checkout for the
MOTION SYSTEM CONTROL BOARD
MOTION SYSTEM CONTROL BOARD
CASSETTE HANDLING
CASSETTE HANDLING
SLOW SCAN CONTROLLER BOARD A6 and COIL
MOTION SYSTEM CONTROL BOARD
CASSETTE HANDLING
A1.
A1.
AY.
AY.
A1.
AY.
Error Codes