Mr Configurator (Servo Configuration Software); Specifications; System Configuration - Mitsubishi Electric MR-J2S-CP Instruction Manual

6. MR Configurator (SERVO CONFIGURATION SOFTWARE)

6. MR Configurator (SERVO CONFIGURATION SOFTWARE)
The MR Configurator (servo configuration software) (MR2JW3-SETUP151E or more) uses the
communication function of the servo amplifier to perform parameter setting changes, graph display, test
operation, etc. on a personal computer.

6.1 Specifications

Item
Communication signal
Baud rate[bps]
System
Monitor
Alarm
Diagnostic
Parameters
Test operation
Advanced function
Position-Data
File operation
Others

6.2 System configuration

(1) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor.
Model
IBM PC-AT compatible where the English version of Windows
NT
Edition operates
Processor: Pentium
(Note 2)
Personal
computer
Memory: 16MB or more (Windows
Free hard disk space: 60MB or more
Serial port used
Windows
OS
Windows
One whose resolution is 800 600 or more and that can provide a high color (16 bit) display.
Display
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connectable with the above personal computer. Note that a serial mouse is not used.
Printer Connectable with the above personal computer.
Communication MR-CPCATCBL3M
cable When this cannot be used, refer to section 14.1.4 (3) and fabricate.
Note 1. Windows and Windows NT are the registered trademarks of Microsoft Corporation in the United State and other countries.
Pentium is the registered trademarks of Intel Corporation.
2. On some personal computers, this software may not run properly.
POINT
Some functions of the MR Configurator (servo configuration software)
may be unavailable for some versions. For details, please contact us.
Conforms to RS-232C.
57600, 38400, 19200, 9600
Station selection
Batch display, high-speed display, graph display
Minimum resolution changes with the processing speed of the personal computer.
Alarm display, alarm history, data display at alarm occurrence
I/O display, function device display, no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, ABS data display, shaft
name setting.
Parameter setting, list display, change list display, detailed display, turning, device setting.
Jog operation, positioning operation, motor-less operation, DO forced output, single-step feed.
Machine analyzer, gain search, machine simulation.
Point Tables
Data read, save, print
Station setting, help display
® Workstation 4.0, Windows
®
133MHz or more (Windows
Windows ® 2000 Professional)
Pentium ® 150MHz or more (Windows
®
Pentium 300MHz or more (Windows
32MB or more (Windows
128MB or more (Windows
® 95, Windows ® 98, Windows
® XP Professional, Windows
Description
(Note 1) Description
® 2000 Professional, Windows
®
95, Windows
® Me)
®
XP Professional, Windows
® 95), 24MB or more (Windows
® Me, Windows NT ® Workstation 4.0, Windows
® XP Professional, Windows
® Me, Windows NT ® Workstation 4.0, Windows
® XP Home Edition (English version)
6 - 1
® ®
95, Windows 98, Windows
® XP Professional or Windows
® ®
98, Windows NT Workstation 4.0,
®
XP Home Edition)
® 98)
® 2000 Professional)
® XP Home Edition)
® 2000 Professional,
®
Me, Windows
® XP Home