Servo Configurations Software - Mitsubishi Electric Melservo-J2-JR SERIES Instruction Manual

12. OPTIONS AND AUXILIARY EQUIPMENT

12.1.3 Servo configurations software

The Servo Configuration software uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
(1) Specifications
Item
Communication signal
Baudrate
(Note 2) Monitor
Alarm
Diagnostic
Parameters
Test operation
File operation
Others
Note: 1. On some personal computers, this software may not run properly.
2. Minimum resolution changes with the processing speed of the personal computer.
(2) System configuration
(a) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model
Personal computer
OS
Display
Keyboard
Mouse
Printer
Communication cable
RS-232C/RS-422
converter
Note: Windows is a trade mark of Microsoft Corporation.
Conforms to RS-232C.
19200bps, 9600bps
Batch display, high-speed display, graph display
Alarm display, alarm history, data display at alarm occurrence
External I/O signal display, no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, automatic VC offset
display
Data setting, list display, change list display, detailed information display
Jog operation, positioning operation, motor-less operation, output signal forced output, program
operation in simple language.
Data read, save, print
Automatic operation, station setting, help display
Which contains a 80386 or higher CPU and on which Windows 3.1/ 95 runs
(80486 or higher recommended).Memory: 8MB or more, hard disk: 1MB or more, serial port used.
Windows 3.1/ 95
640 400 or more color or 16-scale monochrome display which can be used with Windows 3.1/ 95.
Which can be connected to the personal computer.
Which can be used with Windows 3.1/ 95. Note that a serial mouse is not used.
Which can be used with Windows 3.1/ 95.
MR-JRPC98CBL3M MR-JRPCATCBL3M
When these cannot be used, refer to (3) Section 12.1.1 and fabricate.
Needed to use the RS-422 multidrop communication function of the servo amplifier.
(Note 1) Description
Description
12 - 8