HW0481893
For Application of Serial Numbers S3W120-7 to RH9520-3112
Cover plug
Fig. 31 (b) R-Axis Speed Reducer Diagram (For Serial Numbers S3W120-7 to RH9520-3112)
1. Remove a plug from the exhaust port.
2. Remove the cover plug.
3. Inject grease into the grease inlet using a grease gun. (Refer to " Fig. 31 (b) R-Axis
Speed Reducer Diagram (For Serial Numbers S3W120-7 to RH9520-3112) ".)
NOTE
The exhaust port is used for air flow. Do not inject excessive grease into the grease inlet.
4. Reinstall the cover plug.
5. Reinstall the plug on the exhaust port.
Apply Three Bond 1206C to screwed parts when installing the plug.
Grease inlet
Grease zerk A-MT6X1
Grease type: Harmonic grease SK-1A
Amount of grease: 8cc
(16cc for first supply)
9-14
9.2 Notes on Maintenance Procedures
Exhaust port
(Hexagon socket head plug PT1/8)