Table of Contents
Advertisement
2.2 Shipping Bolts and Brackets
2.1.2
Using a Forklift
When using a forklift, the manipulator should be fixed on a pallet with shipping bolts and
brackets as shown in " Fig. 3 Using a Forklift ". Insert claws under the pallet and lift it. The
pallet must be strong enough to support the manipulator. Transporting of the manipulator must
be performed slowly in order to avoid overturning or slippage.
2.2
Shipping Bolts and Brackets
The manipulator is provided with a shipping bracket and 2 screws. (See Fig. 2 Transporting
Position").
• The shipping bracket and screws are painted yellow.
• The shipping bracket is fixed with the hexagon socket head cap screw M10 (2 screws).
Before turning on the power, make sure that the shipping bolts and brackets are removed.
NOTE
The shipping bolts and brackets then must be stored for future use, in the event that the
manipulator must be moved again.
Bolts M16 (4 bolts)
Pallet
Forklift claw entry
Fig. 3 Using a Forklift
Front View
Fig. 4 Shipping Bolts and Brackets
2-3
Shipping bracket
Hexagon socket head
Side View
cap screw M10
(2 screws)
HW0481893
Hide quick links:
Advertisement
Table of Contents
