GE LOGIQ E9 Service Manual page 83

GE
D 5535208-100, R
IRECTION
3-6-4-1 Connect Ethernet (cont'd)
Figure 3-8 Audio (1), Ethernet (2), DVI-I (3) and SVHS (4) connection for External Monitor on
rear side of LOGIQ E9 - R4.x and Later
To avoid breaking the back cover while opening it in order to connect up the network cable, use
CAUTION
a flat blade screw driver or plastic card and pull hard to open up the back cover door.
SVHS Specificatios for BEP6
• DVI-I delivering both analog RGB and digital DVI out the rear customer accessible DVI-I port.
• The DVI-I output support a fixed 1280x1024 resolution @60Hz 24 bit color depth.
• The DVI-D Video output deliver a minimum of 1280x1024 @60Hz 24-bit color depth.
3-6-4-2 Connect USB Flash Drive
Refer to the current revision of the LOGIQ E9 Basic User Manual, Chapter 3, Section 7.
. 2
EV
2
L R
1
Chapter 3 LOGIQ E9 Setup
4 3
2 1
4 3
LOGIQ E9 S M
ERVICE ANUAL
3 - 19