GE LOGIQ E9 Service Manual page 49

GE
D 5535208-100, R
IRECTION
1-9-3 Electrostatic discharge (ESD) prevention
DO NOT TOUCH ANY BOARDS WITH INTEGRATED CIRCUITS PRIOR TO TAKING THE
WARNING WARNING
NECESSARY ESD PRECAUTIONS:
1. ALWAYS CONNECT YOURSELF, VIA AN ARM-WRIST STRAP, TO THE ADVISED ESD
CONNECTION POINT LOCATED ON THE REAR OF THE SCANNER (TO THE RIGHT OF
THE POWER CONNECTOR).
2. FOLLOW GENERAL GUIDELINES FOR HANDLING OF ELECTROSTATIC SENSITIVE
EQUIPMENT.
Risk of electrical shock, system must be turned off. Avoid all contact with electrical
WARNING WARNING
contacts, conductors and components. Always use non-conductive handles designed
for the removal and replacement of ESD sensitive parts. All parts that have the potential
for storing energy must be discharged or isolated before making contact.
If the Shear Wave Option is present, MAKE SURE the LEDs on the Capacitor Pack are
OFF before disconnecting the Capacitor Pack Cables.
. 2
EV
Chapter 1 Introduction
LOGIQ E9 S M
ERVICE ANUAL
1 - 25