GE LOGIQ E9 Service Manual page 487

GE
D 5535208-100, R
IRECTION
8-6-9-1 Alphanumeric Keyboard assembly removal
Table 8-92
1. The Alphanumeric Keyboard
Assembly is installed in the Lower
Operator Panel.
Remove the two shift keys (cap lock
arrows), using the key removal tool
[the "MacGyver" keycap removal
tool will work as well, e.g., a
paperclip] to expose the screws that
secure the keyboard to the Lower
Operator Panel.
NOTE: If the keycap plunger does
not come off with the key, you have
to reinstall it.
To avoid damaging the keytops, use a small Phillips screwdriver to remove the keyboard
screws.
2. Remove the Alphanumeric Keyboard screws (M3 x 8).
. 2
EV
Alphanumeric (A/N) Keyboard removal
Steps
NOTICE
Chapter 8 Replacement procedures
LOGIQ E9 S
Corresponding Graphic
Keycap Tool
Keyboard Mounting Screw
M
ERVICE ANUAL
8 - 141