GE LOGIQ E9 Service Manual page 255

GE
D 5535208-100, R
IRECTION
7-3-5 Capturing Network Logs with Network Sniffer (Software R1.x.x) (cont'd)
NOTE: Steps 5
If you prefer, you may skip the filter section and start the data capture now. If you do, you will
capture all network activity, not just this system's.
5.) On the Configuration screen
tab
6.) In the New Filter section confirm "built-in templates" is selected, then click Create.
. 2
EV
- 12 describe how to filter the data so that you only record this system's network activity.
Figure 7-6 Configuration - Filters Tab
Chapter 7 Diagnostics/Troubleshooting
(Figure 7-6 "Configuration - Filters Tab" on page
LOGIQ E9 S M
ERVICE ANUAL
7-7), select the Filters
7 - 7