GE LOGIQ E9 Service Manual page 481

GE
D 5535208-100, R
IRECTION
8-6-8-1 Upper OP Panel/Touch Panel Assembly removal (cont'd)
Figure 8-44 Upper OP Panel/Touch Panel assembly cables - R4 and earlier
Ribbon Cable from the Operator
1.
Panel, Lower
Trackball Cable from the Operator
2.
Panel, Lower
3.
A/N Cable from the A/N Keyboard
Bulkhead Board USB Cable 1
4.
(from bulkhead position closest to
the OP) in position J24
Be careful not to pinch any of the cables when installing the 195 Panel/Touch Panel Assembly.
NOTICE
. 2
EV
Chapter 8 Replacement procedures
Bulkhead Board USB Cable 2 (from
5.
bulkhead position furthest from the
OP) in position J25
USB Cable 1 (part of Main Cable) in
6.
position J21
USB Cable 2 (part of Main Cable) in
7.
position J22
Power/On-Off switch (part of Main
8.
Cable) in position J23
LOGIQ E9 S M
ERVICE ANUAL
8 - 135