GE LOGIQ E9 Service Manual page 190

GE
D 5535208-100, R
IRECTION
4-3-18-3 Operator I/O Movement - LCD
Check that the monitor functions as described below
Table 4-19
Step
1.
2.
See: 4-2-5 "LCD Monitor Positions and Lock" on page
4-3-18-4 Operator Console Movement (XY)
See: 4-2-4 "Top Console position adjustment" on page
4-3-18-5 Footswitch
1.) Plug in the footswitch.
2.) Select Utility -> Application.
You should see the footswitch programming options for Left Middle Right switches.
3.) Program them all for Freeze.
4.) Then Scan and use each pedal to freeze and unfreeze to be sure each works.
Figure 4-26 Footswitch Function Checks
4-3-18-6 WLAN
• R2.x.x or R3.x.x, see:
• R4.x.x or later, see:
4 - 46
. 2
EV
19" LCD Display Platform Maneuverability Checks
Task
Tilt Forward/Back
Move Left/Right
8-6-8-3 "WLAN - Set up and Check" on page
8-11-23-3 "WLAN Set-up" on page
Section 4-3 - Functional checks
Use both hands, one at the top of the LCD and one at the bottom, to
rotate the screen forward and back.
Use both hands, one at the lower left handle hold of the LCD and one
at the lower right handle hold, to adjust the screen left and right.
4-11.
4-10.
8-530.
LOGIQ E9 S
ERVICE
Note(s)
8-164.
M
ANUAL