GE LOGIQ E9 Service Manual page 473

GE
D 5535208-100, R
IRECTION
8-6-5-3 WLAN - Set up and Check
Table 8-81
1. All configuration parameters should have
been kept and the WLAN should start
working right away. If it does not, check
configuration.
For setting up the WLAN, refer to the latest
revision of the LOGIQ E9 Basic User
Manual, Chapter 16.
When the WLAN is active, an icon appears
in the status bar to indicate whether the
WLAN is installed or disconnected.
2. Select Utility -> Connectivity -> TCP/IP ->
Wireless Network -> Configuration.
If enabled, Available Wireless Networks
appear.
If not connected:
• Highlight the wireless network you wan to
use.
• Click "Connect" at the bottom of the
"Configuration" tool.
To check WLAN is working properly, ping/
verify a device in the network, query WL or
Send an image.
. 2
EV
WLAN - Set up and Check
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
Corresponding Graphic
WLAN Active
WLAN not Active
Configuration Tool Screen
M
ERVICE ANUAL
8 - 127