GE LOGIQ E9 Service Manual page 42

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5535208-100, R

Mechanical safety (cont'd)

TO AVOID INJURY OR DAMAGE TO THE MONITOR, MAKE SURE THERE IS NOTHING WITHIN

RANGE OF THE LCD BEFORE MOVING THE MONITOR AND MONITOR ARM. THIS INCLUDES

PEOPLE AS WELL AS THINGS.

Ensure that nobody touches the console arm/frogleg when moving the Operator Panel.

Use Protective Glasses during drilling, filing and during all other work where eyes need

Use Safety Shoes when doing work where there is any chance of foot damage.

Use Protective Gloves when drilling and cutting.

Be careful not to pinch any of the cables.

Special care should be taken when transporting the unit in a vehicle, see

the LOGIQ E9 by vehicle" on page

LOGIQ E9 WEIGHS 135 KG (298 LB), R3.X AND EARLIER, 140 KG (309 LB), R4.X AND

LATER, OR MORE, DEPENDING ON INSTALLED PERIPHERALS, WHEN READY FOR

USE. CARE MUST BE USED WHEN MOVING IT OR REPLACING ITS PARTS. FAILURE TO

FOLLOW THE PRECAUTIONS LISTED BELOW COULD RESULT IN INJURY,

UNCONTROLLED MOTION AND COSTLY DAMAGE. ALWAYS:

- BE SURE THE PATHWAY IS CLEAR.

- USE SLOW, CAREFUL MOTIONS.

- USE TWO PEOPLE WHEN MOVING ON INCLINES OR LIFTING MORE THAN

16 KG (35 LBS).

Section 1-4 - Safety considerations

4-2-10-4 "Transporting