Measure Setup; To Invoke The Setup Procedure - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
3-8-2

Measure Setup

Modifications of system parameters are supported by diverse dialog pages and windows on the
measure setup desktop:
NOTICE Parameters and possible adjustments mostly depend on the selected Application!
!! NOTICE:
Measure & Calc - shows all settings, which are used for generic measurements as well as
•
calculations in different applications
• Application Parameters - to adjust: status on freeze for different modes, Manual Trace method,
Calculation Ratio, etc.
Global Parameters - to select: if the measurement results should be deleted (= Yes), or kept on
•
screen (= No) as soon as cine mode is activated, cursor type and size, Font size and color of
measure results, position of measure results for different modes, etc.
NOTICE
More detailed information pertaining Measure Setup adjustments is found in the Basic User Manual of
the Voluson E8 / Voluson E6;
!! NOTICE:
see: Table 9-18, "System Manuals - Voluson E8 / Voluson E6 (BT09)," on page
3-8-2-1

To invoke the Setup procedure:

1.) Press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch MEASURE SETUP to activate the setup desktop screen.
In general operations are done with the trackball and the trackball keys (mouse emulation).
Trackball (mouse position):
positions the pointing device (arrow) on the desktop
left trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
upper trackball key (right mouse button):
no function in system desktop
right trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
7 DRAFT (A
EVISION
Chapter 3 - Setup Instructions
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
9-35.
3-53
E6