GE Voluson E8 Service Manual page 322

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
8-2-4 Preparations
1.) Press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select ADMINISTRATION and then click the
which Software/Hardware version is installed in the unit.
Voluson E8
(e.g., BT09)
currently installed Ultrasound
Application Software version
Date of Factory Settings
Figure 8-1 Version check (System Setup - Administration - SYSTEM INFO page)
8-4
7 DRAFT (A
EVISION
(cont'd)
Section 8-2 - System Software - Installation/Upgrade Procedure
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
SYSTEM INFO tab, to see
E6