Measure Setup - GE Voluson E Series Service Manual

3.7.1.11 How to configure InSite ExC
Section 3.13.4 "InSite ExC Configuration" on page 3-77
see

3.7.2 Measure Setup

Modifications of system parameters and settings are supported by diverse dialog pages and windows on the
measure setup desktop:
Parameters and possible adjustments mostly depend on the selected application!
Note
Measure & Calc shows all settings, which are used for generic measurements as well as calculations in different applications
Application
to adjust: status on freeze for different modes, Manual Trace method, Calculation Ratio, etc.
Parameters
Global to select: if the measurement results should be deleted (= Yes), or kept on screen (= No) as soon as cine mode
Parameters is activated, cursor type and size, Font size and color of measure results, position of measure results for different
modes, etc.
Note For further details refer to the Voluson E-Series Basic User Manual.
3.7.2.1 How to invoke Setup Procedure
1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
In general operations are done with the trackball and the trackball keys (mouse emulation).
Note
Trackball (mouse position):
positions the pointing device (arrow) on the desktop
left trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
upper trackball key (right mouse button):
no function in system desktop
right trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
Voluson E-Series Service Manual
KTD106657 Revision 2
Measure Setup button to invoke the setup desktop on the screen.
Setup Instructions
3-61