Mounting/Replacing The 19" Lcd Secondary "Patient" Monitor - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
8-17-4

Mounting/Replacing the 19" LCD Secondary "Patient" Monitor

The 19" LCD Secondary "Patient" Monitor is NOT intended for diagnostic use.
NOTICE
It is an additional device used to allow the patient to watch the proceedings.
!! NOTICE:
8-17-4-1 Wall Bracket Mount
Wall Bracket Mount
1.) Find out the exact position required, so patients can observe the monitor easily.
NOTICE
Take your time to think about the best wall mount position of the monitor in your facilities.
Patients should be able to view the monitor easily and without having to bend or turn around.
!! NOTICE:
Because vertical surfaces vary widely and the ultimate mounting method is out of the
WARNING WARNING
manufacturer´s control, it is imperative that you consult with appropriate engineering,
!! WARNING:
architectural or construction personnel to ensure that the bracket is mounted properly
to handle applied loads. Use appropriate screws and wall dowels.
a.) Mark all the holes of the bracket mount on the wall. Make sure it is level.
b.) Drill the holes, using an electric drill.
c.) Fix the wall bracket mount by means of appropriate screws and wall dowels.
7 DRAFT (A
EVISION
Figure 8-34 Wall Mount kit for 19" LCD Secondary Monitor
Figure 8-35 wall bracket mount
Chapter 8 - Replacement Procedures
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
Monitor Bracket Mount
8-29
E6