GE Voluson E8 Service Manual page 176

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
4-5-4 Load Full System Configuration (Full Backup)
1.) Press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select BACKUP and then click the
4.) Click the LOAD button of the "Full System Configuration" group.
5.) Choose the Destination.
6.) Click on the backup to be restored (additional information is displayed in the table).
7.) Select the NEXT button. The following window will be displayed.
8.) Select the data to be restored to the Voluson E8 / Voluson E6 system.
NOTE: For description of the check box names refer to:
A backup of the Full System Configuration always contains the following data
4-40 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
7 DRAFT (A
EVISION
Figure 4-31 System Configuration Load
Figure 4-32 Select Data to be restored
23, 2012)
UGUST
(cont'd)
V E8 / V
OLUSON OLUSON
S
ERVICE
SYSTEM CONFIGURATION tab.
choose destination
select backup
click [Next]
click [Next]
on page 4-37.
E6
M
ANUAL