Network Ip Address Configuration - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
Section 3-12

Network IP Address Configuration

NOTE: Following Information must be provided by customer or hospital engineer before you can start:
A Station name, AE Title, IP address and Port Number for the Voluson E8 / Voluson E6.
The IP addresses for the default gateway and other routers at the site for ROUTING INFORMATION.
Only if necessary (e.g. for Internet access).
1.) Press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select CONNECTIVITY and then click the
4.) Click the NETWORK CONFIGURATION button, read the message and confirm with YES.
5.) The "Internet Protocol (TCP/IP) Properties" dialog page appears.
You can get IP and DNS
settings assigned
automatically,
if your network supports this
capability.
To specify a DICOM Address, follow the instructions of described in the Basic User Manual of the
Voluson E8 / Voluson E6.
7 DRAFT (A
EVISION
Figure 3-62 Network Configuration
Figure 3-63 Internet Protocol (TCP/IP)
Chapter 3 - Setup Instructions
23, 2012)
UGUST
click [Network Configuration] button, read
message and afterwards confirm with [Yes]
V E8 / V
OLUSON OLUSON
S
ERVICE
DEVICE SETUP tab.
If fixed IP address is required,
you need to ask your network
administrator for the appropriate
settings.
Type in:
• IP address
• Subnet mask
• Default gateway
• DNS server
Note: This Example shows
fictional numbers.
E6
M
ANUAL
3-65